Tips to Prevent HVAC Water Damage

Tips to Prevent HVAC Water Damage

Did you know that your HVAC system can cause water damage to your property? Having an HVAC system can be considered luxurious, but for different households, it is essential because it can help with the heating and cooling of your home. Without its proper maintenance though, HVAC systems have the potential to cause water damage to your property. A clogged drain, pipes that are improperly connected, and frozen evaporator coils can result in extensive water damage. Thus, it is important to maintain your HVAC system to prevent unnecessary heating and cooling expenses as well as potential water damage.

 

Warning Signs That Your HVAC Units Need TLC

Below are the signs that your HVAC system needs some repair. 

1. Water Leaks

If you notice leaks from your HVAC system or other fluids pooling around your unit, it is evident that you have a problem. The leaks may indicate a problem with the evaporator coil, damage to the condensation line, and clogged drains. There is a possibility of water damage if the homeowners neglect these issues.

2. Strange Smell

If you detect an odd odor in your home, it means that moisture has made its way into your unit’s ductwork, causing mold formation. Also, if you smell a musty or burning odor, you should contact a mold removal professional immediately to address your mold issue.

3. Indoor Humidity

The purpose of your HVAC system is to keep your home comfortable by removing the humidity from the air. If you feel uncomfortable, it means that your HVAC system is not doing its job and needs assistance.

4. Inaccurate Thermostat

One of the warning signs that your HVAC unit needs assistance with is if the temperature shown on your thermostat does not correspond to the temperature in your house. Some thermostats are inaccurate, but if you tune in to the HVAC System and still do not function well, it means that your system has a problem, not the thermostat.

5. Inconsistent temperature

If the HVAC system is functioning well, the temperature should be consistent from room to room. Then, if you see that the other room is freezing while the other is very warm, it means that your unit needs immediate care.

6. Strange Noise

Hearing strange noise is one of the warning signs that your HVAC system needs TLC, and this could mean a problem with the belt, a loose component, or other issues. Some of the sounds that need to look out for is hissing, rattling, grinding, squealing, or clunking.

7. Power Fluctuations

If you notice that your HVAC unit keeps on turning on and off throughout the day, it means that it does not get enough power to supply the system. It is also known as “short cycling” and is potentially a dangerous situation.

 

Tips to Prevent HVAC Water Damage

Here are some tips to prevent HVAC water damage

1. Clean the filter

Using a high-efficiency particulate air (HEPA) filter, change the filter in your HVAC system at least once a month. It will help prevent the unit from overworking, which can cause freezing and defrosting on the evaporator coils, and HVAC water damage. Make sure to check the manual to what type of filter you need. Also, note that if the filter is inside the furnace or air handler, hire an expert to change the filters. 

2. Maintain the condensation line

Make sure to check the condensation line opening when running the HVAC unit to make sure you see the water flowing through the drain. The amount of water that flows into the drain should depend on the humidity level in your household. For at least once or twice a year, flush the drain with an algae inhibitor to prevent mold or algae from forming. Use a commercial solution or a regular bleach. If the drain line is already clogged, remove the paper filter and attach a wet or dry vacuum to the drain line to suck out the clogs. Also, make sure to check the main drain line and emergency drain line to see if it’s installed and properly connected. 

3. Clean the condenser

The condenser needs regular cleaning since it is the exterior portion of your HVAC system. It needs proper airflow to work efficiently. Additionally, remove any dirt or debris inside the condenser at least once a year, and keep the plants away from the condenser to ensure proper airflow.

4. Install a condensation pump

Installing a condensation pump can help you prevent water damage. It can help excess water to flow into a proper disposal drain. Additionally, consider adding a safety float switch that will automatically turn off the HVAC unit’s power when condensation builds up, ensuring that there’s no chance of overflow.

5. Maintain the overflow drain pan

The drain pan’s function is to collect any water that has overflowed from a clogged drain line. Drain pans made of metal or plastic can become weakened over time, resulting in leaks and potential water damage. If you see leaks near the drain pan, carefully inspect it for damage using a flashlight. To take action, try to consider patching up small holes or cracks using epoxy glue or replacing the pan entirely. Also, make sure to regularly clean the drain pan by rinsing the pan and cleaning it with a bleach-water solution to clear any dirt or mold growth. 

6. Let the expert inspect your HVAC system.

HVAC maintenance is not an easy task to do, especially if you don’t know how the system works. Hire an expert to inspect and fix your HVAC system to avoid any problems that may come if you do a do-it-yourself HVAC maintenance. Also, they can check and repair any HVAC components, including ductwork, furnace flames, grills and registers, AC compressors, the thermostat, and more. Furthermore, experts can also do mold remediation if your HVAC happens to experience moisture development and do water mitigation.

Is Your HVAC System Causing Water Damage Trouble? Call Professionals

Knowing how to prevent your HVAC system from leaking can help prevent water damage to your property. But, in case your home suffers from water damage due to your HVAC system failure, let restoration professionals like Superior Restore handle the situation. 

Superior Restoration offers quality water damage restoration and cleanup services. We have highly trained technicians who handle everything from cleaning up to content restoration and mold removal. Our technicians use high-quality equipment that ensures your home is back in excellent condition. Contact our local office, Water Damage Lake Elsinore, for more information.

Tips to Prevent Dishwasher Fires (1)

Tips to Prevent Dishwasher Fires

Almost all electrical devices that we have at home can be a fire hazard, and this includes your dishwashers. Though they are the least common fire-related appliances, dishwashers can still cause electrical fires and damage your home. In fact, according to statistics, more than 7 million dishwashers have been involved in fire-related incidents over the past 5years. Taking that into consideration, the safe use of dishwashers is crucial. Keep reading to learn some tips on how to prevent dishwasher fires.

Common Causes of Dishwasher Fires

A dishwasher contains a heating system that dries out your dishes. This heating system gets wet, heats up, and cools down. It’s always necessary to maintain this system to avoid dishwasher fires.

Faulty Wirings

Any appliance can easily catch fire when its wirings are not in proper conditions. Faulty wirings or frayed cords, when wet, can travel heat to combustible surfaces like floor, curtains, and rugs which can eventually start a fire. 

Poor Maintenance

The hidden problems of different appliances are one of the most common causes of a house fire. If the dishwasher is not maintained regularly or if it is outdated, it can develop faulty wirings, issues with the control panels, or even an error in the system. 

Improper Usage

Leaving your appliances unattended while they are in operation has the potential to cause a house fire. The same goes for when someone in your household uses the electrical devices without proper usage. 

Tips To Prevent Dishwasher Fires

  • Make sure to read the instruction manuals of the manufacturers that include the safety tips and guidelines.
  • Follow the instructions properly for proper utilization. 
  • Make sure to register the dishwasher on its website for the safety notices of the appliances.
  • Turn off the dishwasher if not in use, especially before going to sleep or leaving the house.
  • Make sure to always supervise the dishwasher while in operation. Try not to leave it unattended to avoid sudden problems.
  • Make sure to check the plastic components that release detergents, as they can cause leaks.
  • Inspect power cords of the appliances to prevent frayed wirings.
  • Try not to run cords under the carpets and rugs, as they can add to overheating of the power cords.
  • Inspect the extension cords and avoid using them as permanent wiring.
  • Get a professional for annual maintenance of your appliances.
  • Try not to overload electrical outlets to avoid power explosions.
  • Always clean the dishwasher to prolong its life and protect its components.
  • Check and repair broken components regularly. 

Dishwasher Safety Tips

  1. When using the dishwasher, place the sharp utensils like fork and knives face down inside the utensil baskets, and put the spoon up for more room to utilize.
  2. Place the glassware gently to prevent breaking and need to be placed firmly.
  3. Try not to overload the dishwashers as it can cause several problems inside the system.
  4. Make sure to separate your dishes in batches to prevent overloading.
  5. Allow your machine to cool off after extended use. Prolonged usage of the device can lead to overheating. 
  6. Make sure to close the dishwasher door regularly when loading and unloading dishes to prevent leaks.
  7. Add a child safety lock to keep children from opening the dishwasher.
  8. Store the dishwashing products and detergent in a proper place that is out of reach from children.
  9. Make sure to read the labels before using the device.
  10. Try not to fill the dispenser cups until you’re ready to use the dishwasher.
  11. Avoid mixing dishwasher detergent with other cleaning products as it can cause internal leaks of the dishwasher.
  12. Check if the dishwasher is safe before using it.

General Appliances Fire Safety Tips

It’s essential to apply the general safety tips for using appliances. Make sure to keep the equipment at a safe distance and in the proper location. Avoid placing it in areas that are often wet, including the bathroom, kitchen, and basement. If an appliance produces a spark, repair it as soon as possible to prevent a fire disaster. Keep a working fire extinguisher near the appliances to use in case of fire emergencies. Make sure to have a Home Fire Prevention Action Plan. Have your appliances maintained regularly. Make sure to install a smoke alarm on every floor and room of the house. Lastly, always make sure to unplug the devices after use.

In case of a Dishwasher Fire, Call Professionals

To prevent dishwasher fires, make sure to follow the prevention tips above. But, if your home suffers from fire damage due to a dishwasher, contact fire damage professionals immediately. 

Fire damage professionals from Superior Restoration can help you with the cleanup and restoration process. They are a team of experienced professionals and equipped with quality equipment that can efficiently restore your home to its pre-damaged condition. Contact their local office, Water Damage Lake Elsinore, today.

Three Ways to Detect Mold in Your Home

Three Ways to Detect Mold in Your Home

Mold always has its way to invade your home. Sometimes it’s hard to locate where they’re coming from. Given them enough time to grow and spread, they can destroy your walls, floors, ceiling, and even your health. Most often, inhalation of mold can lead to serious health issues and even respiratory diseases such as coughing, runny nose, and allergies. Moreover, black mold can lead to organ failure and even death. That is why you have to know how to identify mold early on to protect yourself and your loved ones. Read on to learn some ways on how to detect mold in your home and tips on how to deal with it. 

What Are the Types of Mold?

There are different types of mold. Mold is a type of fungus that mostly grows in a moist environment. According to statistics, at least 45 million homes in the United States have unhealthy levels of mold. When addressing mold issues, you have to identify which mold to deal with.

Most Common Types of Mold

1. Allergenic

It is a type of mold that can cause an allergic reaction such as eye irritation, skin irritation, or asthma. It is most commonly grown behind the damp walls, carpets, surfaces in the home, etc.

2. Pathogenic

It is a type of mold that is found in areas with no sunlight and poor ventilation. It can cause diseases and it is often hard to detect.

3. Toxigenic

This mold is often found in sewage floods. It produces toxins that if ingested in an ample amount can lead to dangerous health conditions like neurological problems and in some cases, death.

 

Three Ways to Detect Mold in Your Home

There are many signs to identify if the molds are invading your home. But here are some important ways to detect mold growth.

1. Musty Smell

It is the easiest way of identifying mold in your home. The musty odor produced by mold is very unpleasant and distinct. With this musty smell, you can pinpoint where mold could be growing in your home. A very sharp smell of mold can be compared to wet socks, pages of an old book, or rotten wood. 

However, some mold types are not that odorous, especially ones that reside on clean and dry surfaces. Once you encounter this smell, take immediate action in removing mold from your home. If you are hesitant to deal with your mold problems, call a mold remediation professional

2. Development of Personal Respiratory Problems

If you and your family started to feel an itchy throat, have developed allergies, and cause or trigger asthma, blame it on the mold that is growing inside your property. However, there are a lot of reasons why someone develops allergies or respiratory problems. 

According to a study, mold exposure can trigger allergic reactions and asthma symptoms in people who are allergic to mold. Thus, dampness indoors can cause asthma symptoms and respiratory problems. 40 percent of people are more likely to develop asthma symptoms when living in a mold-infected residence. 

Diseases that linked to mold and dampness:

  1. Worsening of asthma
  2. Coughing
  3. Nasal Congestion
  4. Wheezing
  5. Sore throat
  6. Rhinitis
  7. Sneezing
  8. Skin irritation
  9. Headache
  10. Lung irritation
  11. Compromised immune system

3. Look for Visible Leaks

Another easy way to find mold problems is to locate what is causing it. Leaks or excess moisture in your home are the most common reasons for mold growth. If there are leaks in the roof, ceilings, or walls, and the issue was left unattended, mold will begin to develop.

Make it a habit to check areas where mold will likely linger. This includes your toilets, pipes, sinks, water heater, shower, and basement. Fixing the sources of water leaks helps prevent mold from invading your home.

Moisture might develop indoors. Including the following:

  1. Flooding or rainwater from open doors and windows.
  2. Leaky pipes or poorly connected plumbing
  3. Damp carpets, (those carpets that installed in a poorly ventilated room)
  4. The exhaust of bathrooms and kitchens
  5. Outdoor humidity.
  6. Condensation buildup in humidifiers, dehumidifiers, and HVAC systems. 

Mold Problem: What to Do?

Addressing each problem is the only step to save you and your family from the invasion of mold growth. Here are some tips on how to deal with mold in your home.

  1. Look for the primary sources of the problem. Check it regularly to prevent mold from growing.
  2. Test the area with bleach. Dip cotton in some diluted bleach and swab the moldy area. If the area lightens quickly, then come back after washing, you are dealing with mold problems. 
  3. Place a fan or dehumidifier in areas that are affected by water leaks. Dry areas rarely develop molds.
  4. Call for mold remediation professionals.

 

Mold Problem? Call for Help

Knowing ways on how to detect mold in your home can prevent it from causing serious damage, as well as protect your family from possible health issues. Though most homes are susceptible to mold growth, never try to tolerate living with them. Taking care of your health is very important especially, during a pandemic. We do not want another virus to linger in your home. So, immediate actions should take place to eliminate this mold and prevent it from even occurring. 

If you feel like you need help eliminating mold, do not hesitate to call for help. Water Damage Lake Elsinore provides excellent mold remediation services, this includes an experienced team and quality equipment to remove mold in your home. Call our local office now to know more about our emergency services. 

How To Eliminate Black Mold From Your Basement

How To Eliminate Black Mold From Your Basement

One of the most common molds that grow in homes is called Stachybotrys, also known as the black mold. Black mold is a type of fungus that is present everywhere, including air. You can often see them in moist areas like your basement. Unfortunately, dealing with this type of mold can be costly and difficult for most residents. With proper steps, you can effectively eliminate black mold from your basement.

 

What Is Black Mold?

Black mold is typically associated with a moist environment.  It loves to stay in places that are often damp, such as showers, bathrooms, wet basements, and areas where there is a potential source of water damage. Black mold can cause severe health problems because it produces mycotoxins. It is believed that mycotoxins can cause illnesses such as asthma, allergies, and respiratory issues. Thus, as a homeowner, it is crucial to act fast and eliminate black mold from your basement. 

 

Identify the Enemy

For example, your basement experienced a devastating flood. All you need to do is to address the water damage or waterproof your basement immediately. Then, deal with the enemy. Here is how you identify the black mold.

  1. Inspect and assess the area that is prone to molds, including crawlspaces, walls, and floors.
  2. Have a professional inspect your home to identify the black mold. 

 

How to Eliminate Black Mold from Your Basement

Basements are “below grade” spaces in your home, which means they are more prone to producing black mold. Two of the frequent causes of black molds in your basements are water damage (rain and flood) and humidity. Through this, it is easy for the black mold to grow in your basement. 

  • Quickly stop the source of moisture.

If you notice any musty smell from your basement, immediately assess the source of the problem. You may need to perform significant repairs,  including sealing any leaks. It may also be necessary to use a dehumidifier to remove any excess moisture. Use sheets of plastic to cover doors and vents that lead to another room in your house. Use a construction tape to tape the plastic and seal the area to avoid molds spore to become airborne.

  • Take safety precautions.

Before dealing with the enemy, you have to take safety precautions. Use protective eyewear, disposable dust masks, gloves, and possibly protective clothing to avoid any dangers while cleaning and removing mold. 

  • Remove any moldy material in the area.

If the mold has spread only in the small area of your basement, immediately remove moldy materials to mitigate the damage and prevent it from affecting nearby areas. Furthermore, if mold has infested small parts of fibrous materials like carpets, ceiling tiles, and wall material, clean it using your regular detergent and water. Rinse the area with clean water and allow it to dry completely.

  • Clean the moldy areas that cannot be replaced.

For floors, walls, and other hard materials, use a bleach solution (1 cup of bleach per gallon of water) and commercial cleaners to wash and kill the black mold. Also, use disposable sponges for cleaning to avoid mold spores from spreading around your house. You can also use ammonia for cleaning, but make sure to avoid mixing the solutions.

6 Essential Products and Tools That You Can Use in Killing Black Molds

  1. Eye protection, disposable mask, and gloves.
  2. Stiff-bristled brush and disposable sponges.
  3. Mold stain remover
  4. Bleach or ammonia
  5. Cleaning bucket with measuring markers
  6. Spray bottles

Don’t Want to Use Chemicals? Try This Natural Remedy for Killing Black Molds in Your Basements.

Many residents are health-conscious, so they want to avoid using too many chemicals for cleaning. Thankfully, there are some ways to get rid of black mold in your basement naturally.

A better alternative for bleach and ammonia solution is vinegar and baking soda. Since vinegar and baking soda are both acidic, use the materials to scrub away mold and help kill spores in their wake. 

To make a solution, make a half-water and half-vinegar solution and put it on your spray bottle. Then, spray the vinegar solution in the moldy area and leave it overnight. Come back the next day and scrub it with soapy water, but make sure to use your protective gear to avoid inhaling the black molds. 

For baking soda solution, make a paste of 50:50 baking soda and water to use as an abrasive scrub, or mix two tablespoons of baking soda with 2 cups of water in a spray bottle. Then, spray the solution onto the affected area before scrubbing. 

However, this method only works on basements with small-time issues of black mold. For severe mold problems, it is necessary to use solutions that require strong content with professional help.

 

Professional Mold Removal Services

Killing black mold in your basements may be easy to do, especially when using the methods discussed in this article. But, severe problems like hidden leaks, ruptured pipes, or floods, these problems may lead to an explosion of mold growth in all areas of your basement. The best thing you can do is to leave this job to the professionals. 

Water Damage Lake Elsinore offers professional mold removal services. We have experienced and skilled mold removal specialists that can assure you of a clean and better basement. They are equipped with advanced methods and technology in eliminating mold. Call our local office today for mold removal services. 

9 Steps to Prevent Your Garage From Flooding

9 Steps To Prevent Your Garage From Flooding

Flooding is one of the most destructive natural disasters, and it can be a nightmare for your property. But did you know that your garage is the most prone area in your home and can be an easy target for flood damage? Here are some easy steps to prevent your garage from possible flood damage.

Before we talk about how to keep your garage from a possible flood, here are some most common causes of garage flooding.

Most Common Causes of Garage Flooding

  1. Bad weather flooding is one of the most common causes of garage flooding. Floods from a rainstorm, hurricane, and even overflowing water from streams, lakes, or rivers can enter your garage from a different angle.
  2. Burst pipes can cause garage flooding as freshwater pipes that supply water to your house can burst and flow to your garage.
  3. Sewage flooding can be caused by clogging of drainage pipes, too much pressure, and even a failure from sewerage. Sewage leaks can enter your garage and cause a flood. 

 

Steps to Prevent Your Garage From Flood Damage

1. Assess the area of your house

Check if there are areas of your house that can possibly cause a flood, especially the water sources near the garage. Fix and repair them if necessary.

2. Install a flood barrier

Prevent the water from flowing into your garage by installing a flood barrier like a sandbag. Sandbags are efficient in absorbing floodwater. This also helps keep your expensive things stored in your garage protected against flood damage.

3. Seal Leaks or Cracks

Check the wall, roof, and flooring for any signs of leaks or cracks and seal them immediately. Make sure that no water will enter the area to prevent possible flood damage.

4. Inspect The Garage Door

Since the door is your main line of defense against the incoming floodwater, it is important to inspect it. Check your garage door for any signs of damage such as cracks, holes, and gaps to make sure that it is secure against flooding. To secure the damages of the garage door, you can use spray foam insulation and smooth out the hole from the inside using sandpaper. If your garage door is old and worn out, consider replacing it with a new one.

5. Clean gutters regularly

Clean out the gutters and make sure to remove any debris and dirt that may cause blockage and improper flow of rainwater from your roof to the garage. 

6. Install or replace weatherstripping

The weatherstripping at the bottom of your garage door is vital in keeping elements from entering your garage. Install one if you don’t have or replace worn out weatherstripping.

7. Install proper drainage 

Sometimes the street gutters and drains overflow, especially during heavy storms. Consider installing adequate drainage such as a trench drain or sometimes called a french drain in front of your garage door to stop the excess water from entering your garage.

8. Inspect your home’s foundation

Check the foundation of your home for signs of damage and make sure to repair it immediately. Maintain a strong foundation to ensure that no flood happens in your garage.

9. Consider installing storage above your garage door

This is especially important for items that are expensive and valuable. Be strategic in storing your items to avoid flood water damage. You can also consider using plastic containers and duct tape for sealing the items in your garage. Use a ramp to elevate any machine or tools that rust or require electricity. Move all paper documents or photos to a higher level of your house to avoid possible damage. 

Flood Damage? Talk to a Professional

Listed above are the steps that you can follow to prevent your garage from flooding. But if your home suffers from flood or water damage, it’s always a wise decision to have a professional to help you with cleanup and restoration.

 Water Damage Lake Elsinore has experienced professionals that can help deal with your flood-damaged home. We have 24/7 emergency services. Call our local office for more information.  

Tips On How To Waterproof Your Basement

Tips On How To Waterproof Your Basement

There are a lot of benefits of having a basement in your home. You can have a place wherein you can install mechanical equipment such as a water heater or generator, put your entertainment machine, kitchen tools, and even laundry machines. The basement provides easy access to the water pipes and electrical cables, thus, it is essential to keep the spaces dry. Unfortunately, since it is located underground, it is prone to moisture, and that’s why it’s mostly damp, wet, and humid. Here are some tips to waterproof your basement.

Identify the Problem

The first thing to do before waterproofing your basement is to identify what to look out for; Here are some signs to check before assessing the problem.

  • Leaking Walls. Basement walls can be leaking coming from broken pipes behind the concrete. It usually forms damp spots and condensation. Sometimes it comes from the window well leaks.
  • Musty Smell. If you smell this in your basement, it is usually from mold and mildew growth. Mold and mildew developed from the excess moisture in the air. Mold can grow faster on any materials in your basements such as wood, fabrics, carpeting, HVAC, and even pipes.
  • The peeling of paint. Paints can easily peel because of the excess dampness on the wall.
  • Dry rot. This blackish-brown fungus appears if something is in the decaying process and usually can be seen in woods. It can grow as a result of excessive leaks and dampness.
  • Flooding/standing water. If you see this warning sign, it means that water finds its way to your basements and can cause damage.

3 Most Common Mistakes to Avoid

  • Avoid using any plastic-like material to waterproof your basement walls. Plastics are easy to peel and develop moisture.
  • Avoid using tar to cover up the cracks and holes. Tar can become brittle and cracks eventually.
  • Do not rely on waterproof paint, especially if your foundation isn’t firm.

How to Waterproof Your Basement

Here are some do-it-yourself tips to waterproof your basement.

1.  Assess first the area. If you see any structural damage to the foundation, a faulty foundation drainage system, or unusually high hydrostatic pressure against the foundation, it usually needs fixing that can be done by a professional. In cleaning the area, you have to use warm water and liquid dish soap. Use oxygen bleach in killing mold and mildew for a safer handle but make sure to scrub the area thoroughly, then wash it off with warm water.

2. To remove the musty smell, place a dehumidifier in the room to draw the moisture out of the damp and ruin walls, carpeting, furniture, and more. It is also an effective tool for controlling the humidity and condensation of the area.

3. Check for cracks and holes in the basement. If you see cracks or holes in your basement, plug them with hydraulic cement. Hydraulic cement will expand and set in less than five minutes. Make sure to mix it well with a margin trowel and then press it into the hole, divot, or around penetration points.

4. Choose waterproof carpeting materials to address and control the water issues and install water-resistant carpet pads to create a buffer between the basement damps and the carpet itself.

5. Seal the cracks in the walls or on the basement floor. Apply a solid layer of waterproof sealant onto the walls and floors and let it dry first before repainting them.

6. After addressing all the issues, sealing the cracks, and plugging the holes, apply a waterproof coating by rolling or brushing it onto your walls and floors just as you would paint.

7. Check for outdoor issues by checking the gutters and downspouts for leaks to avoid rainwater from flowing through your foundation.

Turn to the Professionals

Protecting your home from water damage is always a must. The basement is the easy target for most water damages as there are a lot of ways to destroy them, such as pipe bursts, natural disasters, and even toilet backups. Waterproofing is one of the best options. But if there is still a flood in your basement, call a professional. Water Damage Lake Elsinore has experienced professionals who can assess your water damaged basement and perform necessary repairs immediately. We have 24/7 emergency services. Call our local office for more information.

Tips to Prevent Hardwood Floor Water Damage

Tips to Prevent Hardwood Floor Water Damage

If you want a modern type house, a hardwood floor is a wise choice to make your home beautiful. However, it is frustrating to have your expensive flooring destroyed with water. Here are some tips to prevent water damage to your hardwood floor.

Causes of Hardwood Floor Water Damage

  1. Broken/Leaking Pipes. It usually causes water damage to the hardwood floor if there is a leak from the ceiling, burst pipes, or even faulty appliances.
  2. Groundwater. It happens when a hurricane flood or any floodwater seeps into your home.
  3. Temperature. The humidity of your home plays a role in damaging your hardwood flooring because it produces moisture that can cause your flooring to crack.

Signs of Water Damaged Hardwood floor

  1. Cupping. You will notice the cupping of individual planks or crowning of several planks creating humps on the floor. Some of the floor planks when damaged with water develop dips and raised edges around them. 
  2. Staining. When you notice visible dark stains on the floor, there is a possibility that it has developed mold growth. As molds usually occur in a moist area, your flooring is probably dealing with water damage. 
  3. Bulging. Another sign that you are dealing with moisture issues on your wood floor is if you notice a “crown-shape” on the woods where it appears to bubble outward. It is the opposite of cupping, and it indicates that there is more moisture on top of the plank than on the bottom.
  4. Buckling. It is the most dangerous water-damaged sign as it concludes that the damages are left untreated for a long time. You will see that the floor panels moved away from underneath.

How to Prevent Hardwood Floor Water Damage

Precaution is always the key to prevent the water from damaging your hardwood floors. Have your home assessed or inspected once or twice a year to prevent any possible causes of water damage, such as burst pipes or water leaks. Inspect and repair roof damage immediately and ensure that gutters are clean from any debris, so rainwater can flow freely away from your home’s foundation. Make sure to seal any cracks or openings in your foundation to prevent water seepage. Other steps to follow to prevent water damage to your hardwood floors include;

  1. Cleaning up immediately. Any water spills can also damage the hardwood floor as it can absorb through the material. Always make sure to clean up any spills or pooling water from your flooring immediately. You can use a wet vacuum to clean a large amount of water. Just make sure to check the vacuum canister from time to time and empty it if it is full. 
  2. Repairing the damage. Check to ensure that the woods are in good condition and repair any signs of damage immediately. Consider replacing old hardwood with a better and reliable wood that won’t easily get damaged with spills.
  3. Avoiding excessive water. Excessive cleaning using water or any solution can also cause damage to the floor. Make sure to avoid using too much water and use an absorbent cloth to keep away the moisture from going through the woods. Avoid using string mops as it can hold too much liquid and not advisable for hardwood floors. Removed any water-soaked materials in the area to avoid moisture from spreading through the flooring
  4. Using absorbent materials. You can prevent any water damage if you place water-absorbent mats or rugs near the area where there can be a possible water spills, like near the door, appliances (e.g., refrigerator, dishwasher), or even under the sink. You can also use an industrial dehumidifier to avoid any excess water from absorbing and damage the hardwood floors.

Safety First

Prevention is the key to avoiding water damage problems. Water that absorbs in any woods can develop mold and mildew. If your water-damaged hardwood floor is left untreated, it could cause a bigger problem to a supposed beautiful home. It can risk your health through molds that grew underneath the flooring, or even weakened the foundation of your house. If any of this happened, better consult a professional.

Water Damage Lake Elsinore has the best and experienced workforce to help you solve an easy problem. Experts are the best option to make your home safe and beautiful. We provide water damage restoration services 24 hours a day, seven days a week. Call us today!

 

The Dangers Of Water Leaks From Your Air Ducts

The Dangers Of Water Leaks From Your Air Ducts

 

Summer heat is still spiking as most cases of wildfire occur. This is why A/C units are the much-needed support in situations like this as they work efficiently to cool your home. A/C units build up water to filter out the humidity and are called condensation. Condensation can lead to water leakage from your air ducts. Condensation seems like a light issue for the homeowners. However, it can cause water leaks from your air ducts, and if left unsolved can lead to bigger problems. Learn here the dangers of water leaks from your air ducts. 

The Dangers of Water From Your Air Ducts

Water is natural for air conditioning units as the filtration of hot air can cause moisture and water leaks. Here are some of the potential danger of water leakage in your A/C units;

  • Dripping Insulation

 Too much condensation in the duct can cause a big problem in your home. When water drips off the insulation it will reduce the efficiency of the materials used for insulating ducts, and it may cause water leakage. Water leakage can weaken the foundation of your homes as they easily travel to the roof, ceiling, and walls. Sometimes the drain line becomes clogged or damaged, which will cause HVAC leaks.

  • Develops mold, mildew, and health issues

Moisture builds around your air ducts can lead to the formation of mildew and molds. They usually grow in an area with a lot of moisture. Formation of this can affect your properties and may spread in your belongings like carpets, furniture, and wardrobes which will eventually to destruction. Not only that. Mold growth can also pose danger to the entire household, especially to those with high sensitivity to mold. According to the CDC,  exposure to mold can lead to some health risks like allergies and respiratory problems. 

  • Fire damage

Can water damage cause fire-related hazards? Yes. Water leakage in areas with electrical wires are present can be a fire threat as they will create sparks and can cause big fire damage. Current from water leaks can easily travel to wiring in all affected areas and create a big cost that addresses the light issue of condensation. Always check your wirings with professionals to avoid the fire occurrences.

How To Prevent Water Leakage From Your Air Ducts

There are many factors to consider in preventing water leakage in your air conditioning units. Here are some ways to prevent all the dangers of water leakage.

  1. Always check your air conditioning unit for any signs of damage and have it repaired as well as maintained monthly to avoid serious problems. Drain lines should be checked monthly to ensure they are clear and draining properly.
  2. Regularly clean the air ducts to avoid mold and mildew build-up and prevent clogging in the drain lines. An air conditioning filter can filter out dust but not the moisture in the vent. Make sure to decontaminate the air ducts to avoid bacteria development and infested with vermin, etc.
  3. Find professionals to help secure the underlying issues of most air conditioning units and strengthen the materials used for insulation and filtration of the unit. Experienced professionals have the equipment and tools to properly clean and maintain the power of every air conditioning unit.

Professional Water Damage Restoration

Staying on top of the dangers of water leaks in your air ducts can help you protect your family and property. However, in case your home suffers from water damage due to water leaks in your air ducts, contact professionals immediately. Unaddressed water damage can lead to costly repairs.

We, at Water Damage Lake Elsinore of Superior Restoration, offer professional water damage restoration services. We have skilled and experienced professionals who are equipped with advanced tools and methods to properly clean and restore your water damaged property as well as contents. Call our local office Water Damage Lake Elsinore today. Also, we offer 24/7 emergency services. 

 

Safeguard Your Home Against Water Damage From Refrigerator

Safeguard Your Home Against Water Damage From Refrigerator

One important technology and a must-have in the kitchen is the refrigerator. Homeowners would even agree about the necessity of having a refrigerator in the home for keeping food safe. However, one of the major causes of water damage to a home is a result of malfunctioning appliances like the refrigerator and ice maker.

 

Recognize the Signs of Refrigerator Water Damage

There are things you need to check if you are unsure of what is causing your refrigerator leak.

 

1. Faulty defrost drain

This is one of the common reasons why a refrigerator leaks. When the defrost drain has a blockage because of food particles or ice, the accumulated water doesn’t drain into the pan during the defrost cycle. Water will eventually build up and will begin to flow right onto your floor.

 

2. Water filter

If your filter doesn’t fit correctly with the model of your refrigerator or if it is not installed properly, chances are there is a poor connection between the filter and the water supply. To prevent your refrigerator from leaking, check to see if water is escaping due to holes in the filter. Also, check the size and model of both the fridge and filter to ensure it’s a perfect match.

3. Drain pan

The drain pan is located at the bottom of the refrigerator. Check the drain pan if there are any cracks. If you observe a significant amount of pooling, it means that the pan has a crack and that is the cause of the leak. Replace the pan right away if you notice any damage.

 

Reduce the Risk of Water Damage

You can reduce the risk of water damage if you take into consideration the following to ensure proper operation of the refrigerator or ice maker:

1. Locate the water shut-off valve and inspect the valve every six months.

  • -Make sure the water supply will shut off.
  • -Replace the valve if needed.

2. Install the ice maker supply line hose properly to avoid water damage.

3. Tightly connect the hose to the valve but avoid over-tightening.

4. Inspect the hose every six months. 

  • -Ensure the valve connection is secure and 
  • -Check for kinks. Replace the hose if kinks are present.

5. Leave a three to four inches space between the back of the refrigerator and the wall to prevent the hose from crimping.

 

Seek Help from Professional Water Damage Restoration

When water damage occurs, it is important to do an action right away to mitigate the damage. Unattended water damage may lead to severe damage. Refrigerator water damage might look small but if you don’t do any action right away, it might lead to other problems such as mold damage.

If you are experiencing refrigerator water damage, call Superior Restoration right away.  Super Restoration deals with water damage cleanup and restoration of all kinds.  Our team is skilled in performing the entire restoration process in a quick and efficient manner. Please call us today, Water Damage Lake Elsinore. We are on call 24/7.

Wet or Damp Walls From Water Damage

Wet or Damp Walls From Water Damage

Your house can be your sanctuary and one of your biggest investments.  Homeowners do everything to protect their homes and their investments.  However, events beyond our control like rainstorms or floods and even leaky pipes lead to the destruction of properties.  And no homeowner would want to deal with any kind of household problem such as water damage. Too much moisture in the home if left unattended could affect the interior structures of the house most especially—- the walls. 

Common Indicators Of Too Much Moisture In Your Home

Spotting these signs earlier will prevent further water damage:

  • Peeling or flaking paint 
  • Curling wallpaper
  • Water stains and discoloration
  • Change in texture (Walls that feel damp to the touch)
  • Visible mold
  • A stale, musty odor

Causes Of Wet or Damp Walls

When moisture comes in and can’t get out of your home, it causes problems.  The most common causes of moisture problems in homes are condensation, leaks, and blocked drains.

 

Condensation On Walls

Condensation in a household setting is when airborne water vapor condenses into a liquid and is deposited on interior (or exterior) surfaces.  When hot, moist air hits cold, dry air, it causes water droplets to form on the cold surfaces (like your walls).  This event is more common in bathrooms and kitchens, where steam is produced by bathing or cooking.

Homes are vulnerable to condensation problems during the colder months.  A large temperature difference between the air outside and the air inside your home encourages condensation on surfaces like walls and windows. This excess condensation can cause wet walls, encouraging mold growth and drywall stains.

 

Drains and Downpipes Blockage

Blockages in your drainage system pose a threat and can be one of the leading causes of leaks. Blocked drains are caused by a number of objects being flushed down your pipes and debris building up over time. This build-up can cause pressure on your pipes which can reduce the flow efficiency of your drainage system and can cause broken pipes and leaks over time.

 

Leaks

The most apparent cause of leaks is problems with plumbing. Almost every homeowner has dealt with a leaky bathtub or sink. Faults in the roof structure, including damaged or missing tiles, poor flashing and broken or cracked gutters and drainpipes, can be the cause of dampness in the house. Also common are issues with water-wielding appliances — washing machines and dishwashers are often the culprits.

 

Steps of Drying Wet or Damp Walls Naturally

Natural ventilation is the least expensive method and one alternative for drying out a wall.  However, this method consumes time and mold can easily spread while waiting for the walls to dry. The following are steps in drying out damp walls:

  1. Shut off the water supply or water source promptly.
  2. Remove wall hangings, paintings, and wallpaper carefully. 
  3. Check any wall or ceiling insulation.  Start removing and drying the insulation from the ceiling down to the floor.  Soaked insulation should be disposed of.
  4. To properly dry out a wall, you need to remove any molding at the top of the wall and baseboards on the floor. Otherwise, the walls won’t have proper ventilation, and moisture can remain trapped behind the baseboard and molding.
  5. Open up your house to increase air circulation.  Open windows, doors, and wall-mounted cabinets then use room fans on the wet area until the walls are dry. Just be careful about plugging in electrical appliances near water. 
  6. To accelerate the drying process, turn on your house’s air conditioner to reduce the humidity in the air.

Dealing With the Water Damage

If your walls are extensively damaged, you may need to consult a professional.  Our team at Lake Elsinore will help you solve water damage problems.  If you need our services, don’t hesitate to contact our local office, Water Damage Lake Elsinore.  We offer 24/7 emergency service. Give us a call to know more about our services.