Tips To Eliminating And Preventing Mold On Bathroom Ceiling

Tips To Eliminating And Preventing Mold On Bathroom Ceiling

When there’s moisture, expect mold to appear. As the experts say, mold adores moisture so much. Unfortunately, we can see several mold problems in our homes, particularly in bathrooms, since it isn’t well-ventilated. 

One common disgusting issue you don’t want to deal with in the bathroom is mold growing on your ceiling. The steam and dampness in your shower room make the absolute breeding ground for all types of mold and mildew. 

Luckily, a homeowner like you can know the proper steps to get rid of mold for a much more pleasant bathroom. You can take care of it on your own. But remember, if the moldy area is over 10 square feet, the best solution is to contact mold remediation specialists. 

Know the Causes of Mold on Your Bathroom Ceiling

In most instances, black mold is what you will notice on your shower-room ceiling.  So, what are the causes of mold growth in your bathroom? Take note of the following:

  • Not enough ventilation
  • Excessive dampness or water leaks
  • Dark areas or places
  • Existence of organic matters as mold’s source of food 
  • Presence of a large amount of oxygen
  • High humidity level (70% and up)
  • Room temperature between 77 and 86 degrees Fahrenheit

In most cases, mold generates in dirty air conditioner vents, behind the refrigerator, under the sink, and in crowded areas with massive moisture levels. The question is, how does mold find its way into your bathroom? Well, once the mold is disturbed, it releases spores in the air and lands on material surfaces where they can infiltrate and spread.

Mold spores also land and settle on clothes, shoes, and even animal fur without knowing it. So through humans and pets, mold can enter your home and start invading humid rooms like your bathroom.

Keep in mind that if you or your loved ones have a low immune system, you are susceptible to several health issues caused by prolonged exposure to mold spores with mycotoxins. So, cleaning bathroom mold must be your priority. 

What is the Recommended Cleaning Products for Bathroom Mold?

Plenty of cleaning products in the market claim to eliminate mold, but ordinary soap and water can generally do the job. If you prefer a natural remedy to remove mold from your bathroom ceiling, you can use the following solution options:

Option #1: Borax

One natural way to clean bathroom mold on ceilings is by using borax, a white mineral powder. To formulate a solution, mix one cup of borax with one gallon of warm water, then fill up your spray bottle. Spray generously onto your bathroom ceiling and use a long handle brush to scrub the mold stains away until they vanish.

Option #2: White Vinegar

Another natural remedy you can use is white vinegar. It’s non-toxic and effective in removing stubborn mold away. Fill up your spray bottle with pure white vinegar and spray abundantly onto the affected area. Please wait for an hour before rubbing it out with a sponge mop or a long handle brush. 

Remember, before you begin the mold removal task, prioritize your protection first by wearing a face mask, goggles, rubber gloves, and suitable clothing that can shield your body. On top of that, you must work in a well-ventilated room.

How to Remove Eyesore Mold from Your Bathroom Ceiling

Once you notice mold increasing in size on your shower-room ceiling, you can do the following simple steps:

  1. Spot the Source.

Find the source of excessive moisture. If there’s a water leak above your shower room, make repairs first before cleaning the mold away. Use a dehumidifier or add an exhaust fan to decrease heat and dampness levels.

  1. Remove Mold from the Bathroom Ceiling.

Start the mold removal job by spraying the moldy site with a cleaning solution of your choice. If the solution you pick is white vinegar, spray directly on the affected area and wipe it with a sponge mop or a clean rag. If it works not, you will have to scrape off, remove, and replace the disfigured ceiling area. 

Seek assistance from mold removal professionals when taking out a terrible moldy textured ceiling. This kind of complicated task requires suitable and protective equipment like special clothing and ventilation masks.

How to Prevent Mold from Coming Back

Next, to prevent future mold outbreaks, you must treat your bathroom ceiling properly after removing the mold away. 

  1. Coat your ceiling with a mold sterilizer or killer to eliminate any leftover mold, then clean it off. Allow it to dry completely. Remember to follow the provided instruction on the product you pick.
  2. Paint the ceiling with a barrier coat. Let it dry thoroughly before coating it with any emulsion you select. Don’t forget to mix it with fungicide additives to stop mold from coming back.

Contact Mold Removal and Remediation Specialists

Mold issues occur in your home when there’s excess moisture or water damage. If you find the mold removal task challenging to deal with, we highly recommend you seek help from professionals. 

Superior Restoration has a team of trained specialists who know how to handle minor to severe water damage and mold problems

We are available in emergencies 24/7. For inquiries about our superior services, contact us today!

Home-Remedy FAQ Does Vinegar Kill Mold

Home-Remedy FAQ: Does Vinegar Kill Mold? 

Mold loves moisture. And when your home is moist, expect to notice mold growth on walls, ceiling, and even in places like your bathroom and basement. Many medical experts warn that prolonged exposure to mold spores can cause health problems like allergic reactions and respiratory problems.

Some household cleaners may do the trick. But if you prefer to use non-toxic products, white vinegar is one of the recommended natural home remedies. Indeed, white vinegar can effectively kill mold.

What is Vinegar, and Does it Kill Mold?

Vinegar is a sour-tasting liquid that contains acetic acid. It is generally produced through fermenting rice, cane, malt, cider, wine, or beer.

White distilled vinegar has antifungal and antibacterial properties that can be used as a treatment for many types of mold. It carries between 5 and 8 percent acetic acid and has a pH of 2.5. White vinegar’s mildly acidic attribute can kill about 82% of usual types of mold. It can also help prevent mold from reoccurring in the future.

Is Vinegar Better to Use than Bleach?

Bleach is thought to be good at removing mold. However, EPA doesn’t recommend using a bleach product to kill mold. Why? Because it only eliminates visible mold, not the membrane underneath the surface. Mold membrane will just dig deeper into the substance to keep away from the said cleaning chemical.

In addition, once mold identifies the bleach as a hazard to its life, it grows back stronger and expands even bigger.

If you want to ask how long it takes for vinegar to get rid of mold, the answer will be depending on the degree of mold growth. Typically, we let the vinegar sit for an hour or two before scrubbing the mold away.

You can remove small mold patches with white vinegar on your own. However, if the moldy area is over 10 square feet, you will have to seek assistance from mold removal specialists.

Things to Keep in Mind

  • Experts don’t recommend using vinegar to kill mold on waxed wood, natural stone, cast iron, or aluminum. Remember that vinegar is acidic, and its acidity level can impair these surfaces.
  • Never mix white vinegar with bleach. If you do, it will produce hazardous chlorine gas that can harm your breathing once inhaled.
  • Never mix hydrogen peroxide with white vinegar. It forms a particular chemical reaction called peracetic acid. It can injure your eyes and skin.

How to Get Rid of Mold with White Vinegar

The presence of mold in your home is indeed irritating. Consider trying the steps below to exterminate mold with white vinegar successfully.

Step #1: Wear Protective Equipment

Remember that prolonged exposure to vinegar can still cause skin irritation even though it’s an organic compound. So we highly encourage you to wear rubber gloves, goggles, a mask, and clothing that shields your arms and legs.

Step #2: Fill up the Spray Bottle with Undiluted White Vinegar

Never dilute the vinegar to water if you desire to notice more effective results.

Step #3: Spray Abundantly Onto the Areas of Mold

Spray the vinegar freely onto the affected areas. You can also use a towel or rag and a bucket to treat the moldy sites. Immerse your towel or rag into a bucket filled half with white vinegar and apply it directly to the mold colonies.

Once you have applied the vinegar, wait for one to two hours before scrubbing it away.

Step #4: Pick a Scrubbing Brush to Scrub the Mold Away

Time to scrub after one or two hours. Don’t forget to submerge your brush in warm water every time you scour the treated sites.

To remove the mold growth more, you can apply a baking soda solution. Into a spray bottle, combine one teaspoon of baking soda and two cups of water. Shake it and spray generously onto the affected sites. Then scrub it down with a scouring pad or a brush.

Step #5: Rinse the Surface with Warm Water

After you scrub the mold away, rinse the treated area with warm water. If there are leftover mold stains, redo steps 3, 4, and 5 until the stains are gone.

Vinegar leaves a strong odor that stays for a few hours, mainly when used in a large amount. So make sure the location is well-ventilated until the pungent smell is gone.

Positives of White Vinegar for Mold Removal

  • It’s an organic compound, so it’s friendly to the environment.
  • It’s harmless to use around humans and pets since it’s non-toxic.
  • It’s adequate to use on porous and non-porous materials.
  • It isn’t costly and is easy to find in most stores.
  • It kills about 82% of mold species.

Negatives of Using White Vinegar to Eliminate Mold

  • It has a strong and peculiar odor that is hard to get rid of in rooms without proper ventilation.
  • Still, 18% of mold species live and remain.
  • It does not kill all mycotoxins.

Hire a Professional For Mold Removal Services

Mold infestation is annoying. But before you decide to remove the mold colonies in your home, identify the cause first. And if the reason is excess moisture, do your best to find the source and make repairs if you can. If the task is too complex for you, it’s time to contact a professional.

Superior Restoration is always ready to serve you. Our trained specialists are available in emergencies 24/7.

If you want to know more about our water damage and mold remediation services, feel free to contact us anytime.

How to Remove Mold in Your Closet - Must-Know Steps

How To Get Rid Of Mold In Your Closet – Must-Know Steps

Mold is an undesirable microorganism that flourishes freely anywhere, particularly in precious homes. And your closets, where you keep your favorite clothes and shoes, are a suitable spot for it to begin generating. Certainly, it’s an ugly issue for you to deal with. Mold thrives in closets due to the following conditions: inadequate ventilation, organic food sources, high humidity, and dark areas. Mold growing in your closet can spread to your valuables and make unwanted damages.  If you do not know how to get rid of mold in your closet, it can spread to your valuables and make unwanted damages.

How to Get Rid of Mold in Your Closet

Consider the following steps to get rid of mold in your closets:

Step #1: Open doors and windows in the rooms to promote better ventilation during mold removal. Placing fans in those rooms can also help the air circulate.

Step #2: Cover your carpet or flooring by laying a tarp or plastic on it.

Step #3: Check your clothes and other items in your closets. Segregate salvageable moldy items from those things that you need to discard.

Step #4: Protect your furniture and other belongings by placing a covering material on them or move them out of the affected areas.

Step #5: Keep yourself protected from mold by wearing a face mask, rubber gloves, and goggles.  

Step #6: Spray some water on the moldy areas in your closets to keep mold spores from flying around the room. 

Step #7: Start treating the affected areas using oxygen bleach or hydrogen peroxide, or vinegar solution. They are some best effective solutions you can use to get rid of mold in your closet. 

Vinegar Solution 

Formulate a 50/50 mixture of vinegar and water into a spray bottle. Spray any mold stains you see in the closets. Wait for about 30 minutes before rubbing down the affected sites with a brush. 

Rinse each area with water, let it dry, and repeat spraying using the same cleaning solution. Air-dry everything thoroughly before returning your belongings into the closet.

Oxygen Bleach or Hydrogen Peroxide Solution

Formulate a 50/50 mixture of either oxygen bleach or hydrogen peroxide and water into a spray bottle. 

Spray any infested spots you see. Leave it for 10 minutes before scrubbing the mold away. Rinse each area with water, then repeat spraying using the same solution. Air-dry all affected sites completely. 

Note: Do not mix bleach with ammonia or other cleaning products. Mixing these chemicals will produce poisonous gas.

Step #8: You can avoid another mold infestation in your closets by focusing on mold prevention. Strive to keep humidity levels between 30 and 50 percent to stop mold regeneration.

Must-Know Steps to Prevent Mold from Growing in Your Closets

  1. Damp clothes are the perfect breeding grounds for mold. So, before storing your clothes and other items in your closets, make sure that they are super dry.
  2. Do not put any unclean clothes or items back into your closets. Mold feeds on dirt found in any organic substances, particularly in fabric fibers.
  3. Avoid packing your clothes and other belongings too tightly in your closets. Air must freely circulate between your items to decrease moisture.
  4.   Do not keep your clothes and other fabric items in plastic tubs or any sealed container. Rather, store them in breathable packaging.
  5.   Avoid placing your items on the closet floor. You don’t want to trap moisture beneath them.
  6.   Consider changing wood or solid shelves with wire shelving to promote better ventilation in your closets.
  7.   If possible, replace your solid closet doors with louvered doors to improve air circulation and prevent mold generation.
  8.   If your closets are in highly humid rooms, do not leave the closet doors open. 
  9.   Consider installing a low-wattage bulb in your closets. Just ensure it isn’t near the clothes and other flammable belongings. If possible, leave the light on 24/7. The light-bulb warmth can help keep the closet dry.
  10. Allow fresh air to circulate in your closets by emptying, cleaning, and drying them thoroughly. Do it regularly.
  11. Consider having an air conditioning unit or a dehumidifier in your home. It controls humidity by removing excess moisture from the air. 
  12. Place silica gel packs in your closets to absorb moisture and keep them dry. 
  13. Do not ignore the musty odor in your closets. Find the source. If you see a moisture issue, make repairs or contact a specialist to help you deal with it.


Seek Help from an Expert

Stubborn mold can creep even into your most decent closets. And you do not have to deal with it all by yourself. Seek help from the experts at Superior Restoration. We have highly skilled professionals who are always ready to help you get rid of mold issues at home. 

We are available 24/7. Contact us for mold remediation services and water damage repair.

_ What Is WHITE MOLD And How To Prevent It

What Is White Mold And How To Prevent It

Lake Elsinore is not exempted from having a humid environment. High humidity plus some food source for mold can cause this organism to thrive and spread in your home rapidly. Moreover, hundreds of species of mold including safe and dangerous species can live both indoor and outdoor. 

While most people focus on black mold, only a few are worried about white mold problems. This is not that known to many but it is still extremely dangerous to deal with. In this article, you will have a broader idea of what is white mold and how to prevent it. 

If you suspect mold in your home or office, calling a mold removal professional is necessary.

What is White Mold

White mold is a term used to describe mold species that may appear white and have a powdery texture. Molds sometimes will be white in their early stages of development then change color after producing mold spores. However, some molds are white regardless of age due to non-pigmented spores and are determined by the kind of material or surface they developed on. Commonly found species at home include penicillium, Cladosporium, and aspergillus.

 Ideal Environment

If your home has moisture problems, any type of mold can grow and proliferate. White mold growth occurs in these areas:

  • Furniture and wooden surfaces.
  • Attics
  • Basements
  • Crawlspaces
  • Carpets.
  • Fabric/Clothing
  • Other porous materials

Identify White Mold or Efflorescence

Examine white mold by its color, smell, and texture. In most cases, this mold is white, fluffy, slimy, and has a musty smell. However, white mold can be mistaken for mildew and efflorescence due to its white appearance. 

Efflorescence is a type of salt deposit caused by salty water that evaporates then leaves a white crystalline appearance and looks similar to white mold. You can usually find them on concrete, stone, or brick. To check the difference between the two, try doing these simple tips:

-Wear gloves.

-Take a sample of the white substance.

-Drop it in a small cup of water.

-Dissolve or squeeze the substance

If the white substance sample breaks or dissolves in water, it’s most likely efflorescence. Efflorescence doesn’t spread and does not pose any health risks.

Is White Mold Safe?

 Any type of mold and mildew including white mold can enter your home without permission. Exposure to it can lead to different health problems and symptoms such as:

  • Allergic reactions
  • Aggravates asthma
  • Respiratory infections
  • Eye and skin irritations
  • Headaches
  • Dizziness
  • Nausea
  • Depression/ anxiety
  • Memory loss
  • Insomnia

 When it comes to your property, you cannot trust white mold because it will just eat away building materials as a food source. Thus, compromising its structural integrity. It’s really necessary to act immediately if you see mold growing and spreading in different areas of your home. Preventing mold can safeguard you and your family’s health and home.

 Prevent White Mold Growth

 One aspect to prevent the growth of mold in your home is to control moisture issues. Moreover, it’s always best to call a professional to properly remove white mold. They can inspect your home and have the right tools to eliminate this fungus in large and even hard-to-reach areas.

Nevertheless, mold removal on small areas can be done on your own. For DIY cleaning solutions on how to get rid of mold, see the following tips:

  1. Protect yourself by wearing a mask, safety goggles, rubber gloves, a long-sleeved shirt, and other important gear that keeps you safe from harmful mold spores.
  2. Ventilation is necessary. Open the windows and use a dehumidifier if possible especially if you cannot put affected materials outside to make sure that fresh air flows through the room. 
  3. Before getting rid of the mold, use a vacuum to clean up the moldy area. Vacuuming can help minimize the number of loose spores that spread as you begin to wash it.
  4. Use soap, water, and a soft-bristled scrubber to clean and scrub down the affected area. In cleaning raw wood, use a cloth rag with a small amount of bleach to wipe down the affected area. In cleaning drywall, only use a soft rag to clean the mold to prevent the material from scratches.
  5. Treat mold growth. You can use baking powder solution, undiluted distilled vinegar to eliminate mold. Put onto a spray bottle and leave the treatment for one hour. You can also use chlorine bleach to get rid of surface mold only. 
  6. After treating the mold growth, sand down the affected area, especially if working with a wood surface. Use a sanding tool or sandpaper to clean the rest of the moldy wood or other surface and repaint/reseal if necessary.


 Mold Remediation Services by Superior Restoration

After DIY cleaning and taking care of moisture issues, why does mold still keep coming back? In that case, we recommend that you hire trained and certified professionals to effectively get rid of white mold and prevent it from returning. They can detect mold in areas that aren’t visible to the eyes.

 Contact our 24/7 office today, Water Damage Lake Elsinore. We provide free Mold Inspection.


How to Remove Musty Odors From Water Damage

How to Get Rid of Musty Smells From Water Damage

Any disaster has an aftereffect, especially when it involves water damage. It is almost impossible to avoid since it is one of the most common causes of property damage. Excess moisture can cause issues such as a musty odor that lingers in your home, as well as mold and mildew growth. Every material inside your home is vulnerable to have this musty smell. Furthermore, the musty odor left behind by water damage will linger for days, weeks, or even months after the initial event. In this article, we will teach you how to get rid of musty smells from water damage. 


Why Does My Home Smell Musty After Water Damage?

The most common reason for a musty-smelling home is the excess moisture left after a water damage event. For instance, water damage occurred and affected porous materials like carpet fibers, fabrics, walls, and ceiling. When these materials are exposed to water and are left unattended for a long time, they can develop mold and mildew growth, which leaves your home with musty odors. 

On the other hand, musty smells from water damage can be prevented when the source of damage is attended to immediately or when the cleanup process is done professionally. 

Superior Restoration is the leading restoration company that offers both water damage restoration and mold removal and mold remediation services. We are your one-stop shop for all your water damage-related problems. 


How To Get Rid of Musty Smells From Water Damage

It’s always safer to have professionals take care of your water-damaged property. However, you can try these tips to remove the musty smells that linger inside your property.

1. Determine the source of the musty odors.

To locate the initial source of the musty odor, you have to be articulate and observant.  Look for the area where the smells are strong and areas prone to moisture and mold growth. If you don’t know where the odor is coming from, it’s hard to get rid of it.

Moreover, try checking all the corners inside your property, including the clothes, fabrics, and carpets, as they are prone to develop moisture from water damage. Try using these tips to detect the mold inside your home and help you find the sources. 

2. Let in the fresh air.

Open all the doors and windows to let the fresh air cover up the musty smell. It’s the simplest way to eliminate odor while allowing air circulation into your house. To extend the removal of the musty smell, open the cabinets, cupboards, and drawers to let the moist air dry out from the fresh air and some sunshine. Poor ventilation and enclosed spaces are other sources of musty odors. 

3. Place a dehumidifier.

Musty odors are most common in areas with poor ventilation and enclosed spaces. You can improve the conditions of your property by placing ventilation fans and dehumidifiers to remove excess moisture and encourage airflow. A humid home attracts mold that causes a musty odor inside your household.

4. Regularly clean your house.

Sometimes messy, dirty, and dusty houses can generate musty smells/odors. So, one of the first things you should do is deep clean the house from top to bottom, including corners and spaces behind the furniture, electronics, and stairs. Use a dust feather, or a clean cloth with cleaning agents to remove the dust and the smell. Also, use a vacuum for carpets or close-fitting areas.

5. Use natural remedy.

Boiling a peeled lemon can help remove musty odors immediately. Bring the peeled lemon in the pot to boil and after that, safely place the pot in a small space to let the steam and fragrance spread inside your property. Use an odor eliminator like vinegar and baking soda to neutralize the smell in the area. Simply place baking soda solution in the affected area and leave it for 24 hours. 

Alternatively, use charcoal to absorb the musty odor when baking soda is not available in your pantry. 

6. Fix potential water leaks. 

Water damage is one of the initial causes why your house smells musty. You must check the kitchen, bathroom, behind the appliance, near the vents, and basement to repair any potential water leaks.

Clean the affected areas thoroughly

If the sources you found are from moisture development and mold growth, start deep cleaning the area using a bleach solution to get rid of mold. Wear appropriate protective equipment, such as gloves, at all times when performing the procedure. Also, ensure that there is enough ventilation inside to prevent endangering your health while removing the musty odor. 

In case you didn’t want to use chemical cleaning agents. Try the following procedure for removing the mold;

  1. Use an empty spray bottle and fill it with distilled white vinegar.
  2. Spray the vinegar in the area and let it sit for several hours.
  3. Soak an abrasive sponge in hot water, then dip it in baking soda.
  4. Scrub the sponge in the mildew area with gloves on to remove the musty smell, or you may sprinkle the baking soda on the affected areas.

If you encounter these situations, call for mold remediation experts like Superior Restore;

  1. Mold growth is in the wall, the floor ceiling, and the moldy area is 10 square feet.
  2. You have health issues that could trigger by mold exposure.
  3. The mold growth is in your HVAC system.

Furthermore, any solution can help in removing the musty odor from water damage, whether it’s a natural or chemical remedy. Firm scrub will remove the visible mold, while the chemicals remove the mold spores. 

8. Know when to call for help.

DIY cleanup is risky especially if you don’t know how to identify the enemies. Restoration professionals have the right tools and equipment to permanently get rid of the musty smells in your home.

What You’ll Need to Get Rid Of the Musty Smells

  1. Protective gears and equipment (such as gloves, mask, etc.)
  2. Cleaning materials like dust feathers, cleaning agents, rag, and vacuum.
  3. Ingredients for natural odor neutralizers like lemon, distilled white vinegar, hot water, charcoal, and baking soda.
  4. Equipment to improve airflow such as dehumidifier, ventilation fans, mini fans for areas in dark and enclosed spaces.
  5. Abrasive sponge, spray bottle, and a garbage bag for DIY cleaning.
  6. Chemical cleaning agents such as bleach solution, hydrogen peroxide, or boric acid.

If the Musty Smells Persist, Seek Professional Assistance.

Although musty odors do occur from time to time, the best thing you need to do is follow the tips above to make your home clean and fresh. However, dealing with these awful smells may consume your concentration, time, and health, so the quickest way to end this suffering is to call for mold remediation professionals like Superior Restoration.

Superior Restoration offers 24/7 quality water damage restoration, mold remediation, and cleanup services. These include experienced restoration professionals and quality equipment that can permanently get rid of musty smells. Contact our local office, Water Damage Lake Elsinore, for inquiries.


Three Ways to Detect Mold in Your Home

Three Ways to Detect Mold in Your Home

Mold always has its way to invade your home. Sometimes it’s hard to locate where they’re coming from. Given them enough time to grow and spread, they can destroy your walls, floors, ceiling, and even your health. Most often, inhalation of mold can lead to serious health issues and even respiratory diseases such as coughing, runny nose, and allergies. Moreover, black mold can lead to organ failure and even death. That is why you have to know how to identify mold early on to protect yourself and your loved ones. Read on to learn some ways on how to detect mold in your home and tips on how to deal with it. 

What Are the Types of Mold?

There are different types of mold. Mold is a type of fungus that mostly grows in a moist environment. According to statistics, at least 45 million homes in the United States have unhealthy levels of mold. When addressing mold issues, you have to identify which mold to deal with.

Most Common Types of Mold

1. Allergenic

It is a type of mold that can cause an allergic reaction such as eye irritation, skin irritation, or asthma. It is most commonly grown behind the damp walls, carpets, surfaces in the home, etc.

2. Pathogenic

It is a type of mold that is found in areas with no sunlight and poor ventilation. It can cause diseases and it is often hard to detect.

3. Toxigenic

This mold is often found in sewage floods. It produces toxins that if ingested in an ample amount can lead to dangerous health conditions like neurological problems and in some cases, death.


Three Ways to Detect Mold in Your Home

There are many signs to identify if the molds are invading your home. But here are some important ways to detect mold growth.

1. Musty Smell

It is the easiest way of identifying mold in your home. The musty odor produced by mold is very unpleasant and distinct. With this musty smell, you can pinpoint where mold could be growing in your home. A very sharp smell of mold can be compared to wet socks, pages of an old book, or rotten wood. 

However, some mold types are not that odorous, especially ones that reside on clean and dry surfaces. Once you encounter this smell, take immediate action in removing mold from your home. If you are hesitant to deal with your mold problems, call a mold remediation professional

2. Development of Personal Respiratory Problems

If you and your family started to feel an itchy throat, have developed allergies, and cause or trigger asthma, blame it on the mold that is growing inside your property. However, there are a lot of reasons why someone develops allergies or respiratory problems. 

According to a study, mold exposure can trigger allergic reactions and asthma symptoms in people who are allergic to mold. Thus, dampness indoors can cause asthma symptoms and respiratory problems. 40 percent of people are more likely to develop asthma symptoms when living in a mold-infected residence. 

Diseases that linked to mold and dampness:

  1. Worsening of asthma
  2. Coughing
  3. Nasal Congestion
  4. Wheezing
  5. Sore throat
  6. Rhinitis
  7. Sneezing
  8. Skin irritation
  9. Headache
  10. Lung irritation
  11. Compromised immune system

3. Look for Visible Leaks

Another easy way to find mold problems is to locate what is causing it. Leaks or excess moisture in your home are the most common reasons for mold growth. If there are leaks in the roof, ceilings, or walls, and the issue was left unattended, mold will begin to develop.

Make it a habit to check areas where mold will likely linger. This includes your toilets, pipes, sinks, water heater, shower, and basement. Fixing the sources of water leaks helps prevent mold from invading your home.

Moisture might develop indoors. Including the following:

  1. Flooding or rainwater from open doors and windows.
  2. Leaky pipes or poorly connected plumbing
  3. Damp carpets, (those carpets that installed in a poorly ventilated room)
  4. The exhaust of bathrooms and kitchens
  5. Outdoor humidity.
  6. Condensation buildup in humidifiers, dehumidifiers, and HVAC systems. 

Mold Problem: What to Do?

Addressing each problem is the only step to save you and your family from the invasion of mold growth. Here are some tips on how to deal with mold in your home.

  1. Look for the primary sources of the problem. Check it regularly to prevent mold from growing.
  2. Test the area with bleach. Dip cotton in some diluted bleach and swab the moldy area. If the area lightens quickly, then come back after washing, you are dealing with mold problems. 
  3. Place a fan or dehumidifier in areas that are affected by water leaks. Dry areas rarely develop molds.
  4. Call for mold remediation professionals.


Mold Problem? Call for Help

Knowing ways on how to detect mold in your home can prevent it from causing serious damage, as well as protect your family from possible health issues. Though most homes are susceptible to mold growth, never try to tolerate living with them. Taking care of your health is very important especially, during a pandemic. We do not want another virus to linger in your home. So, immediate actions should take place to eliminate this mold and prevent it from even occurring. 

If you feel like you need help eliminating mold, do not hesitate to call for help. Water Damage Lake Elsinore provides excellent mold remediation services, this includes an experienced team and quality equipment to remove mold in your home. Call our local office now to know more about our emergency services. 

How To Eliminate Black Mold From Your Basement

How To Eliminate Black Mold From Your Basement

One of the most common molds that grow in homes is called Stachybotrys, also known as the black mold. Black mold is a type of fungus that is present everywhere, including air. You can often see them in moist areas like your basement. Unfortunately, dealing with this type of mold can be costly and difficult for most residents. With proper steps, you can effectively eliminate black mold from your basement.


What Is Black Mold?

Black mold is typically associated with a moist environment.  It loves to stay in places that are often damp, such as showers, bathrooms, wet basements, and areas where there is a potential source of water damage. Black mold can cause severe health problems because it produces mycotoxins. It is believed that mycotoxins can cause illnesses such as asthma, allergies, and respiratory issues. Thus, as a homeowner, it is crucial to act fast and eliminate black mold from your basement. 


Identify the Enemy

For example, your basement experienced a devastating flood. All you need to do is to address the water damage or waterproof your basement immediately. Then, deal with the enemy. Here is how you identify the black mold.

  1. Inspect and assess the area that is prone to molds, including crawlspaces, walls, and floors.
  2. Have a professional inspect your home to identify the black mold. 


How to Eliminate Black Mold from Your Basement

Basements are “below grade” spaces in your home, which means they are more prone to producing black mold. Two of the frequent causes of black molds in your basements are water damage (rain and flood) and humidity. Through this, it is easy for the black mold to grow in your basement. 

  • Quickly stop the source of moisture.

If you notice any musty smell from your basement, immediately assess the source of the problem. You may need to perform significant repairs,  including sealing any leaks. It may also be necessary to use a dehumidifier to remove any excess moisture. Use sheets of plastic to cover doors and vents that lead to another room in your house. Use a construction tape to tape the plastic and seal the area to avoid molds spore to become airborne.

  • Take safety precautions.

Before dealing with the enemy, you have to take safety precautions. Use protective eyewear, disposable dust masks, gloves, and possibly protective clothing to avoid any dangers while cleaning and removing mold. 

  • Remove any moldy material in the area.

If the mold has spread only in the small area of your basement, immediately remove moldy materials to mitigate the damage and prevent it from affecting nearby areas. Furthermore, if mold has infested small parts of fibrous materials like carpets, ceiling tiles, and wall material, clean it using your regular detergent and water. Rinse the area with clean water and allow it to dry completely.

  • Clean the moldy areas that cannot be replaced.

For floors, walls, and other hard materials, use a bleach solution (1 cup of bleach per gallon of water) and commercial cleaners to wash and kill the black mold. Also, use disposable sponges for cleaning to avoid mold spores from spreading around your house. You can also use ammonia for cleaning, but make sure to avoid mixing the solutions.

6 Essential Products and Tools That You Can Use in Killing Black Molds

  1. Eye protection, disposable mask, and gloves.
  2. Stiff-bristled brush and disposable sponges.
  3. Mold stain remover
  4. Bleach or ammonia
  5. Cleaning bucket with measuring markers
  6. Spray bottles

Don’t Want to Use Chemicals? Try This Natural Remedy for Killing Black Molds in Your Basements.

Many residents are health-conscious, so they want to avoid using too many chemicals for cleaning. Thankfully, there are some ways to get rid of black mold in your basement naturally.

A better alternative for bleach and ammonia solution is vinegar and baking soda. Since vinegar and baking soda are both acidic, use the materials to scrub away mold and help kill spores in their wake. 

To make a solution, make a half-water and half-vinegar solution and put it on your spray bottle. Then, spray the vinegar solution in the moldy area and leave it overnight. Come back the next day and scrub it with soapy water, but make sure to use your protective gear to avoid inhaling the black molds. 

For baking soda solution, make a paste of 50:50 baking soda and water to use as an abrasive scrub, or mix two tablespoons of baking soda with 2 cups of water in a spray bottle. Then, spray the solution onto the affected area before scrubbing. 

However, this method only works on basements with small-time issues of black mold. For severe mold problems, it is necessary to use solutions that require strong content with professional help.


Professional Mold Removal Services

Killing black mold in your basements may be easy to do, especially when using the methods discussed in this article. But, severe problems like hidden leaks, ruptured pipes, or floods, these problems may lead to an explosion of mold growth in all areas of your basement. The best thing you can do is to leave this job to the professionals. 

Water Damage Lake Elsinore offers professional mold removal services. We have experienced and skilled mold removal specialists that can assure you of a clean and better basement. They are equipped with advanced methods and technology in eliminating mold. Call our local office today for mold removal services. 

The Dangers Of Water Leaks From Your Air Ducts

The Dangers Of Water Leaks From Your Air Ducts


Summer heat is still spiking as most cases of wildfire occur. This is why A/C units are the much-needed support in situations like this as they work efficiently to cool your home. A/C units build up water to filter out the humidity and are called condensation. Condensation can lead to water leakage from your air ducts. Condensation seems like a light issue for the homeowners. However, it can cause water leaks from your air ducts, and if left unsolved can lead to bigger problems. Learn here the dangers of water leaks from your air ducts. 

The Dangers of Water From Your Air Ducts

Water is natural for air conditioning units as the filtration of hot air can cause moisture and water leaks. Here are some of the potential danger of water leakage in your A/C units;

  • Dripping Insulation

 Too much condensation in the duct can cause a big problem in your home. When water drips off the insulation it will reduce the efficiency of the materials used for insulating ducts, and it may cause water leakage. Water leakage can weaken the foundation of your homes as they easily travel to the roof, ceiling, and walls. Sometimes the drain line becomes clogged or damaged, which will cause HVAC leaks.

  • Develops mold, mildew, and health issues

Moisture builds around your air ducts can lead to the formation of mildew and molds. They usually grow in an area with a lot of moisture. Formation of this can affect your properties and may spread in your belongings like carpets, furniture, and wardrobes which will eventually to destruction. Not only that. Mold growth can also pose danger to the entire household, especially to those with high sensitivity to mold. According to the CDC,  exposure to mold can lead to some health risks like allergies and respiratory problems. 

  • Fire damage

Can water damage cause fire-related hazards? Yes. Water leakage in areas with electrical wires are present can be a fire threat as they will create sparks and can cause big fire damage. Current from water leaks can easily travel to wiring in all affected areas and create a big cost that addresses the light issue of condensation. Always check your wirings with professionals to avoid the fire occurrences.

How To Prevent Water Leakage From Your Air Ducts

There are many factors to consider in preventing water leakage in your air conditioning units. Here are some ways to prevent all the dangers of water leakage.

  1. Always check your air conditioning unit for any signs of damage and have it repaired as well as maintained monthly to avoid serious problems. Drain lines should be checked monthly to ensure they are clear and draining properly.
  2. Regularly clean the air ducts to avoid mold and mildew build-up and prevent clogging in the drain lines. An air conditioning filter can filter out dust but not the moisture in the vent. Make sure to decontaminate the air ducts to avoid bacteria development and infested with vermin, etc.
  3. Find professionals to help secure the underlying issues of most air conditioning units and strengthen the materials used for insulation and filtration of the unit. Experienced professionals have the equipment and tools to properly clean and maintain the power of every air conditioning unit.

Professional Water Damage Restoration

Staying on top of the dangers of water leaks in your air ducts can help you protect your family and property. However, in case your home suffers from water damage due to water leaks in your air ducts, contact professionals immediately. Unaddressed water damage can lead to costly repairs.

We, at Water Damage Lake Elsinore of Superior Restoration, offer professional water damage restoration services. We have skilled and experienced professionals who are equipped with advanced tools and methods to properly clean and restore your water damaged property as well as contents. Call our local office Water Damage Lake Elsinore today. Also, we offer 24/7 emergency services. 


Mold Prevention Tips

Mold Prevention Tips: Keeping Mold Away From Your Home

Mold can literally grow everywhere and are usually good. This microorganism is essential in nature because it helps in the decomposition process of organic matter. However, when mold grows undetected inside your home, it can compromise your health and even cause damage to your property that may require extensive and expensive repair. Thus, it is important to take steps in preventing mold from growing in your home. But to understand better how to prevent it from growing in your home, you must first understand what causes it to grow indoors.


What is Mold and Its Health Effects?

Mold is a form of fungus and can be found both indoors and outdoors. It forms in different colors like green, black, and white. This microorganism appears like spots and normally smells musty. According to the experts, there are more than 300, 000 kinds of molds.

When molds grow outdoors, they can cause no concerns, but when they grow in homes or any kind of properties, they can cause many health issues like sore throat, skin and eye irritation, and coughing. Furthermore, mold exposure can trigger respiratory illnesses like asthma or lung disease.


Thus, the Centers for Disease Controls, recommends that all indoor molds, no matter what type it is, should be cleaned up and eliminated. CDC also does not recommend mold testing as the effects of mold exposure differ from person to person.


What Does Mold Need To Grow

Mold needs three things to grow; food, temperature, and moisture.

Good sources of food for mold are wood, insulation, cloth, and cardboard. When the temperature inside your home ranges from 68 to 86 degrees Fahrenheit, mold begins to thrive. Lastly, mold just needs a little water to grow. In fact, they can grow in areas that have a 60% level of humidity. Furthermore, they can grow as fast as 24 hours on wet surfaces or materials that have not dried out immediately.


How Does Mold Grow In Homes

Mold produces tiny spores and spread through the air. When these spores settle on surfaces with excessive moisture, they will begin to grow and multiply.

Since our homes are usually warm and contain potential food sources, there is only the need for moisture for mold to grow. However, water usually appears in homes by accidents (like a burst pipe, broken appliances, or overflowing sinks) and through natural disasters like flooding. Thus, our homes can be prone to mold growth.


Yet, the key prevention to mold growth in your home is simple; moisture control.


How To Prevent Mold In Homes

Here are the ways on how to curb moisture levels in your home and prevent molds from thriving on it.


  • Identify problem areas in your home and repair them immediately to prevent moisture. 


The damage could be due to a persistent leak in walls, roof, gutters, and plumbing pipes or flooding in your basement. Inspect ceilings and walls for water stains and discoloration. Whatever the cause, make sure to address it immediately.

  • Dry wet areas immediately. 

Mold grows where there is moisture, so tackle every wet area immediately. Wet areas must be dried within 24 to 48 hours. Remove and replace carpets, furniture, and beddings that have been soaked up in the water and cannot be dried immediately. If you have experienced a flood, consider hiring a restoration expert to perform thorough cleaning and drying of your property.

  • Keep indoor humidity levels as low as you can. 

The EPA recommends keeping the humidity level in your home between 30-60%. You can use a dehumidifier or an air conditioner to keep the level low. You can buy a moisture meter at your local hardware store. Humidity levels in your home can change during the day, so you might need to check the humidity levels more than once in a day.  

  • Ventilate appliances (outside) that produce moisture using an exhaust fan. 

Appliances like cooking, shower, dryer vent, and others can generate moisture in your home. Make sure that these appliances are properly ventilated outside (not in your attic). You can install exhaust fans in your kitchen, bathroom, and laundry area to ensure that the moisture they produce goes outside of your home.

  • Direct water away from your property. 

Slope the ground around your home away from your home’s foundation to prevent water from collecting and seeping into your basement. Make drainage that directs the water away from your home.

  • Clean gutters and downspouts. 

Clean and inspect your gutters and downspouts regularly to ensure that water is directed away from your home’s foundation.

  • Improve air circulation in your home. 

When the temperature drops, the air can hold less moisture. Without proper air circulation, the moisture left in your home will remain in your walls, ceiling, windows, and floors. This then can cause mold growth. Open doors and windows to provide proper air circulation and reduce moisture.

  • Use water-resistant building materials

If you are building a new home or remodeling your current home, use water-resistant materials like tile, deep-sealed concrete, waterproof wall boards, etc. In moisture-prone areas, like a bathroom or kitchen, consider using easy-to-clean and water-resistant coverings like vinyl or stone style.

  • Use mold-resistant products. 

Use mold-resistant drywall or sheetrock and mold-resistant paints to prevent moisture from absorbing in your walls.

  • Prevent mold growth in your household plants. 

Plants are beautiful and they can help provide clean air inside your home. But molds love them, too. To prevent molds from growing in your plants, try adding some amount of Taheebo tea to the water you give to your plants.


Contact Superior Restoration For Mold Removal Services

These tips shall help you prevent molds from growing in your home. But if you discover molds in your home, you must eliminate it immediately and contact a mold remediation company, like Superior Restoration. Our professionals are certified and equipped in remediating molds completely. Call our local office, Water Damage Lake Elsinore, for mold removal services today.