water damaged electronics

How To Deal With Water Damaged Electronics

Many of us have probably experienced having electronics damaged by water. It can be due to the flood water invading your home or just a simple spill from your cup. Whatever the cause is, water can wreak havoc to your device.

Water and electronics (probably a lot have heard of it) do not go along well together. Though water is an essential element for survival, it can be an enemy to your device. Does water damage your electronics? Pure water, such as distilled water, is harmless. What’s damaging the electronics are the minerals, salt, and other ions present in the impure water (tap water and drinking water). Once any of these components creep into the electronics, they settle in different places inside your electronics and disturb the internal circuitry of your device. 

What Happens When Water Gets Into Your Electronics

Many of us understand the effects of water on our devices. But not many understood, what happens when these two meet.

  • Short-circuiting

Short-circuiting is due to the impurities in the water that seeps into the circuitry of your device, making the electricity to flow where it should not be and damaging it.

  • Corrosion

Corrosion is not something you can outside of your electronic device and something that does not occur right after you pull it out from the water. Let’s say that your phone is turned off and you jumped into the pool not thinking that your phone was inside your pocket. An immediate method you would probably use is placing your water damaged phone in a bag of rice. When fully dried, you will most likely turn it on. You won’t see any signs of damage. However, over time, the interior part of your phone will start to corrode, and, little by little, it will malfunction.

  • Ruined Batteries

Regardless of the situation, batteries should always be kept away from water. A laptop or phone battery, when exposed to a large amount of water, can get damaged immediately or shortly. When water gets into the battery, it will react to the alkaline inside, causing it to become completely damaged and irreparable.

  • Broken LCD Screen

An LCD screen, of any type, is vulnerable to water. If the water takes its way under the glass of your device and touches the digitizer, it will then shut off. When this happens, there’s no way for recovery. That is the reason why when the screen of your phone, watch or any type of device when broken, it has to be replaced. 

Restoring Water Damaged Electronics

Water damage electronics might be a nightmare for many, but there are some ways you can do to restore your device. Before taking any steps, make sure that safety comes first. Remember that water and electronics are no match, thus it is dangerous to handle water-damaged electronics.

Turn off Your Device

Stop the power right after the damage. Remove the batteries or power connectors. The device that has no power will not short-circuit, thus you will have more chances of getting your water damage electronic restored. Doing this will also prevent you from getting injured.

Wash Your Electronics with Pure Water

This solution cannot be applied to all types of electronics. Small type devices such as cellphones, iPods and other handheld electronics cannot tolerate further wetness.

However, large electronics can be restored by washing it with pure water. According to some experts, washing electronics with pure water will remove the salt and mineral sediments and will not get further damage.

Clean the Corrosion

As mentioned above, corrosion does not happen right after the damage. It takes some time before it can fully affect the performance of your device. Thus, taking immediate action is necessary for restoring your water damaged device.

Green areas on the device, together with the battery connectors, charging ports, SIM card connectors and other metal connectors should be thoroughly cleaned. Use cotton swabs and a cleaning solution, such as isopropyl alcohol, baking soda, and water, or even vinegar to clean the corrosion on the device. Apply the solution gently to the affected area until the corrosion is fully removed.

Dry the Device

There are several ways you can take in drying your water damaged device. 

A small water damaged device can be shaken to drain out remaining moisture. A soft cloth can help in removing excess moisture. A hairdryer (on its coolest setting) can also be a great tool in drying your device. Once the device is completely dry, you can attempt to replace the battery and the turn the device on. 

A Friendly Reminder: An electronic that has been damaged by water has no guaranteed fix, especially if corrosion took its toll. You can take the tips above, but they don’t assure you that your water damage device will be restored. In the end, you might need to contact water damage professionals

residential water damage causes and its sources

Household Water Damage: Common Causes and Its Sources

What causes water damage in your property?

Water damage usually occurs when excess water begins to flood in the areas where it shouldn’t. Many different factors can be the leading reason to create this excess water and thereby contribute to water damage. 

Being aware of the potential water damage causes gives you time and space to take precautionary measures to help insure against a leak or flood. When aware, you will also be able to spot a problem as soon as it arises and nips it in the bud before it has the chance to cause any additional damage. As soon as you notice and identify the problem, the less work the water extraction and water damage restoration company will have to fix.

As an owner, whether residential or commercial building owner, you have to be aware of the possible ways to protect your property against damages. It is very unlikely to think of one’s homes being ravaged by the elements, but it happens, and when it does, you need to be prepared. Instead of being reactive, you can try taking proactive steps to safeguard your homes and protect your belongings.

Water damage can be attributed to several sources. Some of them can be controlled and the problem can be prevented, but others are related to external threats and there is little one can do. Here are some common causes and sources of water damages:

Plumbing Problems

This is one of the most common sources of water damage. While some plumbing issues occur within the walls and are impossible to detect, many happen because of hoses and pipe joints not being fully attached. Periodic once-overs under your sink can help mitigate any plumbing problems. It happens when water pipes in the bathroom or kitchen break or leak due to wear and tear or temperature fluctuations. Whereas leaking pipes won’t cause too much damage if they are found and fixed promptly, burst ones can have catastrophic results unless the water supply valve is turned off quickly. Pipes located in basements or installed in exterior walls can easily freeze during the winter and so they are more susceptible to break.

Clogged Drains

All it takes is one toilet flush and the bathroom floor can be drenched with water in a matter of seconds. If your toilet is clogged, it means that not only can you not use the toilet, but you will likely also experience water backing up into the shower, sinks, or bathroom floor. Sewer water is extremely dangerous because it contains raw sewage and bacteria, and must be cleaned up by a professional. If your kitchen sink drain is backing up, you can experience sink overflow and subsequent damages to your kitchen flooring and cabinetry. Make sure to seek professional help when experiencing frequent drain clogs so you don’t have to deal with water damage to your home on top of the clog itself. It can also appear in gutters. Gutters will not drain water properly if they have a blockage from debris such as leaves and branches. When this happens, water flows over the gutters’ edges and runs down the side of your home. This can cause water to seep into the home around your foundation. Water damage can also be caused when there is a sewer system failure and water back up and fills the home floors.

Leaking Pipes.

Water damage in the home is often caused by leaky pipes. Let’s pretend that you have a loose-fitting pipe under the kitchen sink or in the bathroom, and you’ve just recently noticed water pooling in that area. Pipes that burst or leak are common culprits of water damage. Drains and toilets that get backed up and blocked can cause undue pressure in the pipe, which then causes it to burst or leak. Garbage disposals that aren’t working properly are another common reason for pipes to burst, as are roots that grow in the yard into the sewer lines. Old or rusty pipes are also more prone to leaking. Don’t wait to call a plumber – a leak in one place in your home could signify leaks in other areas, too. If you notice spikes in your water bill, a leak is likely present and needs to be addressed before additional damage is caused to your landscaping, foundation, flooring, or other areas of the home.

Malfunctioning Household Appliances

As household appliances get older, their pipes begin to rust and crack and their hoses can weaken. Washing machines, refrigerators, water heaters, and dishwashers are all susceptible to deterioration, so keep an eye on older machines. The two main appliances that cause water damage in homes most frequently are washing machines and hot water tanks. Any problem with these appliances must be addressed quickly, but it’s also wise to maintain them and replace worn parts.

Natural Disasters and Weather-Related Problems

While you have no control over natural water-related disasters, you can take all the preventative measures possible ahead of time to minimize their effect on your home. Flash floods, sudden storms, and hurricanes can all trigger water buildup. Prompt attention by contacting a Water Restoration Team as soon as you can after a weather-related issue. It will help lessen the time for water damage to occur. Also, it is vital to keep in mind that insurance companies have better plans for residences, which have taken all the necessary precautionary measures.

Stated above are the top five causes of interior water damage. By knowing the most common causes of home water damage, you’ll be able to take preventative steps to avoid them. But what if it’s too late for prevention? Our home water damage restoration company offers service throughout the Lake Elsinore area, so you’ll always be in good hands. 

Water damage in the bathroom

Almost nothing is quite as annoying as the discovery that your shower or bath club has sprung a leak. Unless you find the leak in its inception you have no idea how long the leak may have been happening and how much water may have accumulated underneath the shower or bathtub. Water can travel great distances within houses structure and you may be looking at quite massive bills to deal with the fallout from even a very small leak.

One of the most common areas that shower or bathtub can leak from is the faucet leading into it. Often this is due to the O-rings or rubber washers that form part of the faucet wearing out with time. In order to replace this part you will first need to disconnect the faucet from the bath or shower and this can sometimes be very difficult. Oftentimes a buildup of hard water deposits encrusts the faucet and makes it very difficult to remove but with patients it can be done.

Always be sure to switch off the water at the main before you undergo any major plumbing work. This will prevent untoward accidents from occurring while you are working on your bath or shower. If you find that the water damage has become too much for you to deal with on your own you should call in a water damage restoration company to help you with the work. These professionals will not only deal with the issue but also take away the stress of the situation from you.

Even if your bathroom hasn’t suffered water damage it always has the possibility of doing so and when you’re remodeling your home it’s the perfect time to put in place some preventative measures. The worst thing is to find out after years that mold is developed and structural damage has occurred. The following is a list some steps that you can implement the new bathroom plan to ensure that moisture will not be a problem.

  • Due to the extreme temperature variations on the pipes leading to and from your bathroom any point phased on exterior walls can start to sweat and cause water damage over time. Where possible put or pipes inside of interior walls to avoid this issue.
  • No matter whether you have a steam shower or a regular shower in your bathroom of vast amounts of steam are created. The found in the ceiling of your bathroom is there not only to get rid of smells but also to vent steam and prevent the buildup of water. Make sure your fan is in working condition and that it is large enough to accommodate the size of the bathroom. After your bath or shower leave the fan running for a minimum of 30 minutes to remove all moisture in the air.
  • Condensation in the tank of your toilet is typical especially in summer months where homes that don’t use air conditioning. The best and least expensive way to avoid this is to purchase a and installation kit for your toilet

Tiled shower floors look very nice but they also have a downside. The grout between each of those tiles is an excellent way for water to penetrate and for Malta form below the shower. If this happens to you consider replacing the tiles with a one-piece shower floor pan. They come in a variety of shapes and sizes hopefully there will be one to fit your Shower design.